Kembali

INFORMASI

EBI 12-TC230 Conductivity Data Logger

Cat. No. : 1340-6667

Brand	Ebro
Berat	1 Kg
Stok	indent

Deskripsi

Spesifikasi Teknis

Temperature / Pressure Data Loggers EBI 12 series

General specifications for all EBI 12-TP series
Operating temperature (pressure logger)	0 °C ... +150 °C (+32 °F ... +302 °F)
Temperature
Accuracy	±0.1 °C (0 °C ... +120 °C) ±0.05 °C (+120 °C ... +140 °C) ±0.1 °C (+140 °C … +150 °C)
Resolution	0.01 °C
Sensor	Pt 1000, Class A
Pressure
Accuracy	±10 mbar (50 mbar … 150 mbar) ±10 mbar (2,050 mbar … 2,250 mbar) ±10 mbar (3,000 mbar … 3,250 mbar) ±15 mbar (for the remaining measurement range)
Resolution	1 mbar
Sensor	Piezoresistive pressure sensor (temperature compensated)
Data memory	Max. 100,000 measurements (total)
Sampling rate	250 ms ... 24
Measurement mode	• Endless measurement • Measure upon start time • Start immediately until end of memory • Start- / Stop measurement
Storage temperature	0 °C ... +125 °C (+32 °F ... +257 °F)
Maximum operating pressure	Pressure logger: 7 bar (abs)
Minimum operating pressure	Logger with flexible cable probe: 20 mbar (abs)
Time accuracy (24h)	< 5 sec
Battery	Lithium cell, 3.6 V, user replaceable
Dimensions (Ø x H)	48 mm x 32 mm*
Weight	Approximately 120 g *
Housing material	316 L Stainless steel / PEEK
Protection class	IP 68
Certificate	Factory calibration certificate

Product lines

	Red line	Blue line
Short Description	Temperature data logger with external probe less than 2 mm diameter Data logger with additional units Special process logger	All other temperature data logger
Radio mode	Loggers can transfer data during the measurement process	Not possible
Total memory capacity	100,000 values	27,000 values

Click here to download brochure

Untuk info lengkap mengenai Harga dan Stok silahkan kontak kami via Online Chat atau Contact

EBI 12-TC230 Temperature / Conductivity Data Logger 1340-6667

Conductivity measurement (Red Line)

In processes like e.g. washer disinfectors, the measurement of conductivity in the last dishwater is required.This is reasonably done in the running process without any interruption.

• 1 external temperature probe

• 1 external conductivity probe

Specification
Temperature
Measurement range	0 °C ... +125 °C (+32 °F ... +257 °F)
Accuracy	± 0.2 °C
Resolution	0.01 °C
Sensor	Pt 1000
Conductivity
Measurement range	1 … 2,000 μS/cm
Accuracy	± 0.5 μS (1 μS/cm .. 20 μS/cm) ± 1.0 μS (20.1 μS/cm .. 100 μS/cm) ± 2.5% of measured value (100.1μS/cm ... 1500μS/cm) ± 5% from the measurement range (remaining range)
Resolution	0.1 μS/cm
Sensor	Conductivity electrode
Data memory	2 x 50,000 measurement values
Measurement mode	• Endless measurement immediately • Start / Stop measurement • Measure immediately until end of memory
Storage temperature	0 °C ... +125 °C (+32 °F ... +257 °F)
Max. operating pressure (burst pressure)	2.5 bar (abs.)
Battery	Lithium cell, user replaceable
Dimensions (D x H)	48 mm x 130 mm
Housing material	316 L Stainless steel / PEEK
Protection class	IP 68
Factory calibration certificate	0 °C, +60 °C and +121 °C 5 μS/cm, 100 μS/cm, 1413 μS/cm at +25 °C
Radio mode	Not possible

Produk Lainnya