INFORMATION

EBI 12-T100 Temperature Data Logger

Description

Technical Specification

EBI 12 – The new data logger generation

• High quality stainless steel housing

• Application range from -90 °C to 150 °C

• High temperature accuracy up to 0.05 °C

• Extended temperature measurement range -200 °C to +400 °C

• Pressure measurement up to 4,000 mbar

• Precision pressure measurement 0.1 mbar

• High pressure accuracy up to 0.25 mbar

• Humidity measurement from 0% rH to 100% rH

• Conductivity measurement 1 to 2,000 μS/cm

General specifications for EBI 12 series

Operating temperature: logger	-90 °C … +150 °C (-130 °F ... 302 °F)
Operating temperature: radio operation	-30 °C … +150 °C (-22 °F ... 302 °F)
Temperature accuracy	±1.5 °C (-200 °C … -85 °C) ±0.5 °C (-85 °C … -40 °C) ±0.2 °C (-40 °C … 0 °C) ±0.1 °C (0 °C ... +120 °C) ±0.05 °C (+120 °C … +140 °C) ± 0.1 °C (+140 °C … +150 °C) ± 0.5 °C (+150 °C … +250 °C) ± 0.8 °C (+250 °C … +400 °C)
Time accuracy	< 5 sec (24 h)
Temperature resolution	0.01 °C
Sensor	Pt 1000, Class A
Interval	250 ms ... 24 hours
Measurement mode	• Endless measurement • Start / stop measurement • Measure upon start temperature • Start immediately until end of memory
Storage temperature	0 °C … +125 °C
Maximum operating pressure	Temperature logger 10 bar (abs)
Minimum operating pressure	Logger with flexible cable probe 20 mbar (abs)
Battery	Lithium cell, 3.6 V, user replaceable
Dimensions (Ø x H)	48 mm x 24 mm
Weight	Approximately 110 g
Housing material	316 L Stainless steel / PEEK
Protection class	IP 68
Certificate	Factory calibration certificate

Product lines

	Red line	Blue line
Short Description	Temperature data logger with external probe less than 2 mm diameter Data logger with additional units Special process logger	All other temperature data logger
Radio mode	Loggers can transfer data during the measurement process	Not possible
Total memory capacity	100,000 values	27,000 values

EBI 12-T100 Temperature Data Logger

with internal temperature sensor (Red Line)

Application sample

• For process monitoring during convenience food production

• For routine control in bedpan washers

• For temperature mappings

• To measure in raw material storage

Specification

Measurement range (Use in EX Area)	EBI 12-T100: -90 °C ... +150 °C (-130 °F ... +302 °F) EBI 12-T100-EX: -40 °C ... +85 °C (-40 °F ... +185 °F)
Data memory	100,000 measurement values
Factory calibration certificate	-20 °C, 0 °C, +60 °C and +134 °C
Sample Rate	250 ms ... 24 Std.
IP Rating	IP 68
Battery	Lithium battery (3,6 V), user replaceable
Dimensions	(Ø x H) 48 mm x 24 mm

Ordering Information